Make Sure Your Electric Battery Is Safe By Keeping It Clean



Have you ever tried to jump start your car battery and was dismayed that it was covered in gunk? If perhaps you were wondering what the glop was, it was battery oxidation, formed by acid condensation. You can easily clean this by using a simple chemical solution. A typical household product, namely baking soda, is able to clean battery acid very easily. You'll want to be mindful when doing it but there are just a few instructions on how to clean your battery.

The very first thing you must do is to find the necessary supplies, which you may already have at home. The essential tools you'll need are a pair of safety glasses to protect your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. A few open-end and box wrenches, a plastic or metal scraper, cleaning brushes for a battery terminal, and a turkey baster or perhaps a small funnel. You must also have a few sponges, spray-type household cleaner, rubber gloves in addition to a bucket of clean water. All this will guarantee a safe cleaning of your battery.

You'll have to have the safety glasses and rubber gloves to safeguard yourself from the sulfuric acid that's contained in the corrosive deposits. Take care to never get the deposits on the car since it will damage the car's paint job. How much you need to clean the battery is determined by how much corrosion it has. To be able to fully remove the dirt and corrosion, you will need to take the battery out of the vehicle. For this initial cleaning, you use the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

The next thing to complete should be to mix one tablespoon of baking soda along with one pint of water then use it to clean the battery and the cable connections using the turkey baster. After that you can use the bristle brush to loosen and remove the deposits from the battery and you want to remove the cables so that cleaning will be easier. You can take off the cables, beginning with negative first then positive, using the pliers and wrenches. For additional components of the battery, use the brush to remove the deposits then rinse with the baking soda solution.

So now start using the liquid cleaner within the spray bottle, and a sponge to get rid of the remaining dirt and grease. After, dry every one of the Extra resources parts and reassemble everything and be sure you hook up the cable with positive first. Finally, after everything is secured and correctly assembled, you will now have a safe and clean battery.

Leave a Reply

Your email address will not be published. Required fields are marked *